Have you done a leakdown or compression test?
If you have the results still post them in thr tech section. There is a good list going…might be helpful for se of thr belt dr8ven guys in the future
yes…all is good on compression test and leak down test.
Its rare to have the belt driven motors eat oil. Check the PCV and when you pull the intake for the spacers look to see if the valves are real clean and if there is any oil in the intake. That can be a sign of oil flush
yeah i did the spacers already just have not had time to put the DIY pics together and post it…been busy with work. intake ports where pretty damn clean. so intake runners where pretty much spotless of black gunky oil build up. there was however freshy fresh oil in there.
here is a pics i have now on my phone…will post full DIY ASAP
http://i.imgur.com/40Gbll4.jpg
http://i.imgur.com/zcrVn6Z.jpg
If you have the results still post them in thr tech section. There is a good list going…might be helpful for se of thr belt dr8ven guys in the future