@Dlugi11 @seaton83
Another update.
I unplugged both fuel sensors, both no differens.
So I put all together again. But the car was only starting for few seconds, and then stops. Same errors like before…
(But the new fuse was still intact?) (Maybe because I haven’t cleared the errors?)
The video I mentioned earlier, about the fuse problem, also mentioned the Relay. (614, on the photo earlier.) I was removing it, and tried to start.The relay is for the fuel pump. And of couse the car could not start at all.
I put the relay back in, and cleared all the codes, and the car was starting - with NO ERRORS!.
The car was on for 20 minuttes. (And I was able to give throttle.
(I was not driving, because i still was charging the battery.)
All seems fine…
Later I was just trying to start again, and same issue again…
So a question:
Could it be the Relay? It only cost about 10$, so that is easy to try.
But does it make sense?
When the car starts fine without errors, then it is clear that there is no fault with either the MAF or the Fuel pumps.
So could it be the relay? or maybe a wiring connection somewhere?
It is a periodic error.
@seaton83 Do you have a picture of what fuse in the trunk you got the problem?