a new gto? did he swap in the LS3?
gahhh so jealous
Typo. LS2. The thing is crazy…cam, headers, stall, slp catbac…we did some pulls before he got the cam. I got slaughtered.
I know…we’re spoiled in fall/spring. But in summer, the lines are a million cars deep. Figure about 40 seconds per run and you’re at a 60-90 minute wait in staging. Awful.
Last year when I went in November with my S4 there were maybe 15-30 cars at the track at any given time. I never once had to wait to run more than 2 minutes. So I could run a couple of times, then park the car, then jump right up to the staging lasers when I was ready to go again. Awesome. I would get 10-12 runs but only because I kept letting the car cool for 20-30 minutes at a time.
Here’s a question…would it be better to drive at say 40 mph in 6th gear rather than sitting with the hood open, as far as cooling things down? I ask because I often have my best time right when I get to the track, after a long drive to get there.
I don’t know for a fact but usually having fresh moving air and having the coolant system circulating and the oil circulating usually does a better job at cooling things off than sitting with the hood open and th eengine off. If you drive under 30MPH, crack the hood open but don’t release the latch. Not highly recomended but I’ve done this during auto cross events between class changes etc. It cooled off my BMW’s way faster than sitting still with the engine off.
So for the 1/4, maybe you can pop the hood right after you slowed down for the turn around and then continue driving slowly through whatever area is open/free until you are ready to stage again. Jsut a thought.
that second is in about a week as JHM gets down to supercharging Dan’s RS4. The expectations are pretty excellent. low-mid 12s and 120s and 500 whp. oh hi!
no heads or intake? Just wait till he gets those
moving at light load and low rpm is best, without the coolant/oil moving and air coming by it just sits and cooks. So if you can hotlap as much as possible as long as you arent heating up the clutch. Log iat throughout the runs, it should increase a bit but not drastically.
Oh yeah he has an Intake. Forgot about that. I remember him saying something about FAST being his next mod? It must stand fr something and I’m not in the loop so I don’t know.
Here is his car a few weeks ago…the red camaro is an LS1. Not sure what he has done to it besides headers and SLP catback
https://www.facebook.com/video/video.php?v=292272070802945
oh my bad, by intake I meant an intake manifold… which would be what he means by a FAST. Ask him if its stock heads
I fear what’s coming for the RS4. We’re seeing what 91gl is doing with his aggressive S4 program. I understand the laws of diminishing returns but how long til we see an 8E V8 in the low 11’s? Or will traction become an issue before that? Or broken axels/diffs? I don’t remember having seen what abuse the drivetrain can take.
Are your expectations not very excellent? 
Lol sorry not 12s
was looking at the videos again… those of us with stock suspensions look at our cars bounce on the start. that cant be good for the 60’!!!
meh. I cut 1.82 and a bunch of 1.85-6-7 60 foot times in my S4 on stock suspension. I think Jaybquick’s B6 was on stock suspension too. I don’t think it’s your biggest concern.
Not sure about cabracco85…he’s the 60 foot master. If he’s on stock, you REALLY don’t have anything to worry about.
cabracco has coilovers iirc, but iirc he sets them up for the track (dampening adjustments)
Just talked to him. He said he has stock heads for now. Just looked up those IM’s. Wow you can really see where JHM is getting inspiration for all the parts for our cars. That’s awesome.
Just spend the alst hour looking at used Terminators…do want…so bad
Termis are fucking spensive!!! looked at em over the summer…high 30’s low 40’s !!
start a fucking domestic thread lol