Timing parts chat

[bangoman]

Great info, thanks for sharing

Note from site moderation. These are the comments from this thread
http://audirevolution.net/forum/index.php?topic=2746.0

[JimGreen]

FAQ - Timing Component Issues - Part by Part

I’m sure Jake can express more then I can. But if you don’t control the oil temps intake temps and maf readings don’t expect great results. Most of us get about 45-50+who over stock with a JHM tune and good exhaust. But if the car is too hot on the dyno expect the car to go into protection mode and not give back much power. If the dyno conditions are close enough to what you would see on the road you should be ok.

What you will notice is if the dyno isn’t doing a good job of simulating the real world your hp numbers will start low and get higher and higher each pass as the motor starts cooling down.

Hi Justin, thanks for the info on that, I’m hoping it’s a traditional English day cold & foggy… LOL, but at least the guys with the UK Tunes (MRC, APR, REVO, TSR …etc) will be in the same position.

The guys who run “Surrey Rolling Road” are the local experts when it comes to tuning Audi’s so they know what they’re doing which is really reassuring.

Here’s a few cars I believe they’ve had some involvement in (Some more than others).

http://i18.photobucket.com/albums/b118/jimgreen72/1601493_10153773655335234_460579819_n_zpsa86b7e27.jpg

http://i18.photobucket.com/albums/b118/jimgreen72/10299042_10154344388090234_836644207854132721_n_zps492a0029.jpg

http://i18.photobucket.com/albums/b118/jimgreen72/10520085_10154344388100234_5514839253717824433_n_zpsd572e6a5.jpg

And finally one of their dyno cell (Rolling Road)… which looks like a very impressing cell.

http://i18.photobucket.com/albums/b118/jimgreen72/10492617_10154295723000234_7531828036368619516_n_zps3014a51c.png

[JimGreen]

FAQ - Timing Component Issues - Part by Part

Jim sorry I kept going off topic. Your part by part thread is really helpful. Maybe the mods can split the thread.

No problem, if they would like to move it into a separate thread I’m happy for them to do that. As long as they let me know where they’ve put it… LOL.

I’ll keep adding to it as I work through my box of old parts.

Cheers… Jim

[NY07RS4]

Thanks for taking the time to share your findings. Many will find this type of information very helpful. + Karma for your efforts.

[JimGreen]

Thanks for taking the time to share your findings. Many will find this type of information very helpful. + Karma for your efforts.

No problem at all, without the help from the guys on here I’d still be scratching my head.

As they say “A picture is worth a thousand words”.

Jim

[justincredible]

Thanks for taking the time to share your findings. Many will find this type of information very helpful. + Karma for your efforts.

No problem at all, without the help from the guys on here I’d still be scratching my head.

As they say “A picture is worth a thousand words”.

Jim

Jim great stuff your really helping give a good idea to others on whats going on here.