I’ve got bags and wheels on my S6…
you own an a6, not an s6. What could you possibly know about measuring performance? ;D
It’s funny the rs4 posers like flying tomatoes, mickf29, rs4power etc always pull that shit on the b6/7 s4 guys like euroswagr, justincredible, jfunkey when the s4 guys show them up. Those s4 guys know know more about the rs4 and getting performance out of one than the rs4 guys ever will. They have no other comeback. They would get owned for preaching about needing a custom tune for their barely modded cars, or would try to bust out the back pressure myth to defend their smaller than stock diameter 2.25" catback, or would blame carbon for robbing them of 80 whp after they ran slower than stock at the strip with a $5,000 modlist. The first generation rs4 owners were a fucking nightmare.
These s6 guys are miles better…but they’re still hideous snobs with barely half a clue.
You should start a build thread. It will be so tight.
Find me an RS7 exhaust yet?
Maybe the intake would show gains in the 1/4th if it was made out of titanium?
I’ve never been to the strip and heard anyone say ‘Looking forward to running the one fourth mile!’.
It’s the quartermile. Or quarter mile. Or 1/4 mile. Or 1320. Or the strip.
Pet peeve 
[QUOTE=sciblades;9186232]Introducing my pvc intake for the s6/s7 it is for sale for $500 drag strip proven by back to back runs and makes your car go faster.
http://i787.photobucket.com/albums/yy158/GCL06/DSC00585.jpg
well_armed I know you will be the first to buy this product as it has been test on the 1/4 mile feel free to paypal me immediately
[/quote]
My response:
[QUOTE=Ynnekdude;9186330]You guys are aware that despite the fact that it was a cheap piece of PVC, it really could have showed gains? Obviously a consumer would want a much more refined product but those results may not be an anomaly. Look at the traps; it’s not a massive difference but definitely possible that the PVC showed gains. Obviously, it would be necessary to create a much larger sample of runs in order to actually qualify any gains.
Then again, we are idiots for thinking that intakes do anything for heavy cars… I mean seriously, that custom intake on my 4200lb A6 didn’t pick me up at least .2 in the 1/4, perhaps more.
[/quote]
Can’t wait to see them manipulate my words and then tell me to leave because I drive an A6. Can’t wait until well_armed gets his S6 and hopefully blows sci’s time out of the water. Watch how quickly they backtrack and change their tune about him…
I prefer to say the four sixteenth mile run.
You need that lowest common denominator! Math teachers everywhere are flipping shit.
My response:
[QUOTE=Ynnekdude;9186330]You guys are aware that despite the fact that it was a cheap piece of PVC, it really could have showed gains? Obviously a consumer would want a much more refined product but those results may not be an anomaly. Look at the traps; it’s not a massive difference but definitely possible that the PVC showed gains. Obviously, it would be necessary to create a much larger sample of runs in order to actually qualify any gains.
Then again, we are idiots for thinking that intakes do anything for heavy cars… I mean seriously, that custom intake on my 4200lb A6 didn’t pick me up at least .2 in the 1/4, perhaps more.
[/quote]
Can’t wait to see them manipulate my words and then tell me to leave because I drive an A6. Can’t wait until well_armed gets his S6 and hopefully blows sci’s time out of the water. Watch how quickly they backtrack and change their tune about him…
[/quote]
Something strange about those time stamps.
I doubt he was able to do run 1, come back to the pits, switch out the intakes, stage, line up, and go again all in 4 minutes. I call bullshit.
I noticed the exact thing but didn’t even bother bringing it up. I think he probably just popped the top off the airbox and then threw the PVC on… if he ever even did that.
Sorry, but even when I was hot lapping directly on the track with no impending cars it was 3 minutes.
I am talking hauling ass back, straight up to the staging lane and onto the line without stopping. Sciblades is straight lying. Can’t wait to see what bullshit excuse he uses to try and cover up this mess.
http://farm8.staticflickr.com/7362/9258029001_6cf876a8ea_b.jpg
So, just got a PM from sciblades . . . He thought my sarcasm was supporting him hahaha, that’s too good to make up.
So Milltek just posted this picture up on their Facebook page.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1404639_547446022003280_2045459393_o.jpg
From what I can tell, its an Audi S6/S7 electronic muffler valve retrofitted to a prototype exhaust.
The muffler is different from the current design showing on their site, so i am not sure if its for another chassis (but the valve is definitely the same). Regardless, these guys don’t understand how the valve works (like BBi).
Sometimes I wonder how complete idiots make enough money to own expensive ass cars…it blows my mind. Usually the premium Audi crowd is the most clueless because MONEY=no need to turn wrenches. They just like to press the gas pedal and go weeeee… And double park like douches.
I HAVE to double park my duramax all the time. People don’t realize that they don’t want to park next to me, as I WILL dent your car when getting out.
Thats right… you just keep getting cooler with every post. Duramax… you have great taste in cars my friend…
I just park as far away from other cars as possible…especially in my truck.
Or the 400-ish metre run. Which can be run in 43.18 secs, a record that was set in 1999 by Michael Johnson - surprised to see it hasn’t been broken this century.
[quote= ABT Rep.]Hello Doug,
Thank You very much for your interest in ABT Sportsline! Below you will find the pricing along with some pictures ( attached ) of the ABT S6 4.0T exhaust system for use with the serial rear skirt.
The system has been designed to improve the sound and not the HP output of the vehicle.
Price: $5695.00 plus shipping
Kind Regards
Justin Gill
ABT Sportsline
U.S. Business Partner
603-832-3470
www.audituningusa.com
http://farm4.staticflickr.com/3756/10536368233_e33982eb53_o.png
http://farm4.staticflickr.com/3798/10536364713_5ae0dbc80e_o.png
[/quote]
$5,695.00 exhaust… Shot in the future (2012-2013) on a Sony floppy disc camera???
http://www.governmentauctions.org/uploaded_images/flop-798625.JPG
Aahahahaaa you didn’t know
Is the abt slogan…abt…priced to prove there is a rich sucker born every m8niute