Are these the correct part nos for an AT drain and fill?
Oil strainer (filter) 09E325429 Price:$77.25
Gasket for oil pan 09E321371A Price:$44.25
Plug 01V321376 Price:$10.88
Seal ring 01V321379 Price:$3.63
There was some question on one site about a 24- vs. 13- hole gasket, but nowhere else. Also, what kind of ATF is recommended?
OEM Fluid.
Jimmy should be able to help you re gasket.
I got the fluid, gasket and other parts from ECS without issue if that helps…
Do you have to completely remove the exhaust/down pipes to get to do an AT service? Or is there a trick to it?
A few tips and tricks, have you read the manual, jimmy might be able to chime him and help you all.
I haven’t read the manual, just looked at it on the lift with my mechanic.
I had to remove the Y pipes to get to a couple of the pan bolts. it sucked.
Yeah, I don’t remember hearing it being one of the most fun or easy jobs honestly. I little time consuming and some pita bolts especially if a bit oxidized.
You are going to need to use a vag com when filling the fluid as you need to have the transmission temp up or your going to be over filling the fluid. It is better to have a little extra vs a little less
On the fluid. I have used redline fluid for years on 6hp transmissions and it works great better than the oem fluid.