Got some evap error codes yesterday morning. Solid CEL. Here’s the log:
3 Faults Found:
001110 - EVAP System
P0456 - 001 - Very Small Leak Detected - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 165268 km
Time Indication: 0
Date: 2017.07.22
Time: 09:30:03
Freeze Frame:
RPM: 2351 /min
Load: 27.4 %
Speed: 108.0 km/h
Temperature: 79.0∞C
Temperature: 24.0∞C
Absolute Pres.: 980.0 mbar
Voltage: 13.970 V
001109 - EVAP System
P0455 - 001 - Large Leak Detected - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 165871 km
Time Indication: 0
Date: 2017.07.23
Time: 09:07:30
Freeze Frame:
RPM: 767 /min
Load: 25.1 %
Speed: 12.0 km/h
Temperature: 93.0∞C
Temperature: 25.0∞C
Absolute Pres.: 980.0 mbar
Voltage: 13.970 V
001090 - EVAP Emission Control Sys
P0442 - 001 - Small Leak - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 166205 km
Time Indication: 0
Date: 2017.07.24
Time: 07:50:48
Freeze Frame:
RPM: 644 /min
Load: 26.7 %
Speed: 0.0 km/h
Temperature: 67.0∞C
Temperature: 23.0∞C
Absolute Pres.: 970.0 mbar
Voltage: 13.843 V
Where should I look to solve this? Thanks again for the help, guys.