Introducing JHM Tuning for the B8-S5 with the 32v 4.2l FSI V8!!!
We have specialized in tuning naturally aspirated (NA) or “all motor” 4.2L V8 engines since we started tuning the B6-S4 in 2008. Ever since then we have been the number one company when it comes to Audi V8 performance. Like our success with the B6-B7 S4 and B7 RS4 has shown, our software has been proven time and time again to deliver real world performance. That continues with our tuning for the B8-S5 4.2L FSI V8. We purchased our in-house B8-S5 4.2L in mid-2013 and immediately began developing software. After countless revisions and putting the vehicle through our rigorous R&D process, we are happy to now offer the ultimate performance software for your B8-S5 4.2L FSI V8!
In true JHM fashion, here is some footage of our in-house, record setting B8-S5 running 12.6 seconds at 108 mph in the quarter mile!
https://www.youtube.com/watch?v=vD0M3yE2W0o
Not only does our software perform, but it performs time and time again. Here are three back-to-back 12 second passes:
https://www.youtube.com/watch?v=99AT3ET6lZo
JHM Performance Software for the B8-S5 4.2L FSI V8 will completely change the dynamics of how your S5 performs. This is because we change hundreds of ECU parameters to extract as much power possible and doing so without removing OEM safety parameters. You will experience much more torque throughout the entire RPM range and notice how much more powerful the car is when coming out of shifts. Not to mention our famous Launch Assist feature will help you execute a consistent launch each and every time. Our software turns your car into something that the S5 should have been from the factory.
RECOMMENDED SUPPORTING MODIFICATIONS
Our software alone will completely transform your S5. However, if you are looking to extract even more power, here are a coupe modifications we highly recommend!
- JHM 2.5" Catless Test Pipes: Our 2.5" catless test pipes are very beneficial when it comes to making more power with the B8-S5. Removing the restrictive OEM catalysts will allow your engine to flow more exhaust and make more power.
- JHM 2.5" Cat-Back Exhaust System: The 2.5" exhaust system that we offer for the B8-S5 will allow the exhaust to flow more efficiently with the calculated scavenging effect of our X-Pipe, allowing you to make more power.
To find out more about our performance software for the B8 S5 4.2L FSI, Click HERE!
To find a Flashing Dealer near you, click HERE!
If you have any questions or would like help getting our software installed your ECU, please don’t hesitate to give us a call or shoot us an email!
209-968-0077
Sales@JHMotorsports.com
Jake