Hi guys
Im having probs with the vcds .
I have the Original one by the way.
If I read block 118 or 02 (anyone)etc at idle with the car running its does not have any problem , the prob start when I start WOT its stop reading and its blocks… I have to start all over the proces again.
I have uninstall and re-intalled again with no success …Any input?
Thanks in advance.
Using window xp.
What kind of laptop are you using? When I had my Lenovo X61, I had similar problems when logging with ECUx… Turns out the laptop had a shock recognition that was being triggered by the acceleration. Probably the coolest problem to have with your laptop, your car is too quick thus setting off the shock sensors.
I’d put some money on that being your problem if you have any sort of newer laptop. Mine was running XP too FWIW, I just had to go in and disable the setting or change the sensitivity.
JEEJE
I own a Lenovo …How did you disable the setting?
Thanks again man.
Regards.
Haha, no problem…
http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-53167
I remember seeing the icon in my little desktop tray on the bottom right, but if you don’t see it there, go into the control panel and search for the screen that you see on that link to Lenovo. Either disable it, or just crank that sensitivity. I would disable for logging, then enable it again when I was done!