Is there any special process for bleeding the brakes on the S6? Looking to get 3 liters of ATE SL6 fluid and getting the old fluid out.
Planning on just opening the bleeder screw while someone pumps the pedal. Keeping the reservoir full. Anything wrong with that process/method on these cars?
Interested in this. I wanted to get the better looking calipers with the s6 on them and this would help
None that I know of. I use a Motive Bleeder and work from longest to shortest run. I think I used 2 bottles, but it has been a while.
The only thing I know for sure is: DO NOT RUN OUT OF FLUID.
ABS systems do not like air introduced from the top.
Ed
It’s pretty easy, I’ve done it a few times. Like the others said keep topping up the reservoir. Also just don’t depress the accelerator all the way down as it can damage the system, only about half way like you would do for normal braking.
Also keep the bleeder immersed in fluid so that you don’t get any air going back into the system.
Good luck