Latest Addition...

B6/7 S4/RS4
#1

My ‘new’ 06 S4.

I’ll just let the pics do the talking.

http://farm8.staticflickr.com/7173/6720354581_8d353a6b15.jpg

http://farm8.staticflickr.com/7150/6720354915_aa71c50760.jpg

http://farm8.staticflickr.com/7157/6720354853_cf3d2373cf.jpg

http://farm8.staticflickr.com/7150/6720354685_daa9bf9f44.jpg

http://farm8.staticflickr.com/7157/6720354647_2f2ff11f70.jpg

Any questions let me know.

#2

Looks good. Specs on wheels? What mods?

You should post these up in the B6/B7 picture thread.

#3

Mod List Snapshot:
*VAG-Com mods done

  • Seatbelt chime gone
  • Passenger seat weight sensor noise gone
  • Around the World Mod)
  • Gauge Sweep (coming soon)

Engine/Transmission:

  • Cold (hot) air intake
  • Militek stainless steel cat-back exhaust, Non-Resonated
    2 1/2inch Catless down pipes (custom made)
  • JHM LW Crank Pulley
  • JHM Intake Elbow Heater Bypass Mod
  • JHM MAF Hose
  • JHM “Solid” Short Shifter Trio Package
  • JHM 93 Tune w/Launch Assist
  • Apikol Snub Mount, Polyurethane

Suspension/Drive System:

  • H&R Lowering Springs
  • H&R Front and Rear Sway-bars
  • Stainless steel brake lines
  • 19" Axis Staggered Black wheels 19x8.5 Front 19x9.5 Rear
  • Pirrelli PZeros tires (265 Rear, 245 Front)
  • Slotted & Cross-drilled Rotors
  • Apikol Rear Diff Mount, Polyurethane

Interior:

  • S4 Rubber Floor Mats
  • Pioneer double-DIN W/touch screen navigation, Bluetooth, IPod, Phone, DVD
  • Rear Camera
  • Valentine 1 radar system
  • Interior LED lighting (glove box, doors, under seat, under dash, rear, and sunvisor)

Exterior:

  • Roof mounted Shark fin removed
  • Joey Modded, Self Leveling, Adaptive Headlights w/ Clear Corner Mod
  • RS6 LED fog lights
  • EuroGear Carbon Fiber hood w/ Locking flush mount hood pins (Specially painted)
  • EuroGear Carbon Fiber trunk w/spoiler (Specially painted)
  • EuroGear Carbon Fiber (Deval) Splitter
  • Osir Carbon Fiber rear diffuser
  • Osir Carbon Fiber B pillar
  • Osir Design Carbon Fiber Mirrors
  • EuroGear RS4 front bumper kit for S4
  • LLTek RS4 Lower Grill Kit (mesh)
  • ECS RS4 Front Center Grille
  • Limo-dark window tint all-around (have to change for legal tint)
  • Blacked out Emblems
  • Black Painted Exhaust Tips
  • 3M Vinyl Matte Black Window Trim (Professionally done)
  • Black Painted Calipers
#4

The pictures really did do all the talking. No need to say much more other then what mods and what plans for mods do you have

#5

You bought Hemlick’s car (Niko)! Fack, I didn’t know he sold it already, any word on what he’s doin for a car now?!?!

He was planning on going stg 3 JHM with it, and then once he went to sell it. I was trying to get him to swap parts with me before he sold as we both had black B7’s, he said he was too lazy to deal with it basically (which I completely understand).

#6

The only other mods I have planned at this point are a full Cayenne brake swap.
Down the road, there will be the JHM lightweight clutch kit (hopefully not anytime soon) as well as a fully adjustable coil-over kit so I can fine tune the balance of the car once I have a more finely tuned understanding of the chassis itself. Of course there is the JHM Stage 3 package… However, I have another project that I am far more focused on, this car is all about a cruiser for me.

Maddog, you are correct, this is Nico’s old car.

I am really enjoying the car and it’s current setup.

#7

Welcome!

So you have the JHM LW Flywheel but not the clutch from JHM? Stock clutch with LW flywheel?

#8

At the moment I am running all stock clutch related parts (clutch/pp/fw).

I’d love to get into the JHM clutch kit with lightened flywheel… but again, not anytime soon
(knock on wood…)

#9

man, the B6/7 S4 cars are all so well sorted these days. Crazy.

Engine/Transmission:

  • Cold (hot) air intake
  • Militek stainless steel cat-back exhaust, Non-Resonated
    2 1/2inch Catless down pipes (custom made)
  • JHM LW Crank Pulley
  • JHM Intake Elbow Heater Bypass Mod
  • JHM MAF Hose
  • JHM “Solid” Short Shifter Trio Package
  • JHM 93 Tune w/Launch Assist
  • Apikol Snub Mount, Polyurethane
#10

Nice to see you made it over here.

#11

Joe, thanks for the suggestion to head over here.

Sakimano, I am just super fortunate to have had the po’s spend their hard earned getting this thing dialed in. I am just picking up where they left off and can only hope to continue the stellar method of maintaining this car.

It will be long, slow road with this thing, I am in no rush at all to do anything other than keep it running and keep it shiny!

thanks everyone for the warm welcome.

#12

I think Imay have read your mod list too quickly. I thought I saw JHM LWFW but I see you have their LWCP. Nice. Great list to start off with.

#13

Bad ass lookIng car and very solid mod list. That should serve your performance needs for a while

#14

Thanks 91, I share that same position.

#15

Just make sure your maintenance is up to date. Read around on here, you’ll learn that along with spark plugs, coil packs, and fuel filter, that also older 02 sensors, leaky valve cover gaskets and even busted motor mounts will zap you of power! So always be on top of those and you’ll have a great car for many years.

Also make sure you are using the right oil and change it according to your driving habits ever 3-5k miles

#16

:o

Badass car. Its so mean it threatened to punch me in the face… and I believed it.

#17

Hahaha, it really is bad ass looking. I love it!

#18

take your time. You’re probably making 380-390 hp and 360-380 tq (crank)…that’s a killer car. Probably sounds badass with the Milltek.

Hit the dragstrip one day. You’ll be surprised how fun it is (if you haven’t been before).

#19

Welcome!! I always loved a well sorted black car. Very sinister looking. Makes me miss my Jetta…

#20

such a nice car! More pics!