Finished up the install today. Still need to fine tune everything before moving on to Maestro to crank timing up. Wiring of the solenoid is pretty simple. One wire to ground and the other to the green wire of the controller (output to pump). I went in the car in the wheel well at the same place as the wires for my bixenon high beams.
Last piece of the puzzle is to add the FMIC nozzle. I pulled the bumper and drilled and tapped the hole right in the end tank. I originally wanted to put it on the back to hide it, but space constraints wouldn’t allow it. After putting everything back together, I found out that I’ll need to buy a 45 degree hose end and possibly shorten the hose to keep it from sticking out of the bumper.
http://i10.photobucket.com/albums/a129/2fast4sanity/image_zps98066070.jpg
http://i10.photobucket.com/albums/a129/2fast4sanity/image_zps9c14c5c2.jpg
http://i10.photobucket.com/albums/a129/2fast4sanity/image_zpsbbe616c9.jpg
http://i10.photobucket.com/albums/a129/2fast4sanity/image_zpsd231bd57.jpg
http://i10.photobucket.com/albums/a129/2fast4sanity/image_zpsf3b7f955.jpg
http://i10.photobucket.com/albums/a129/2fast4sanity/Mobile%20Uploads/image_zps85ee4157.jpg