So a GIAC tuned car on 91 makes 404whp and 341wtq... ROTFLMAO...

B8 S4
#1

http://www.audizine.com/forum/showthread.php/467861-It-s-finally-here-GIAC-Stg-1-Flash-on-CA-91-oct

So this dude who is not a vendor/sponsor on AZ gets to push $1K plus tunes with BS and they hate on me for selling some paddles… LOL I hope APR and Revo complain… That dyno sheet is so funny… Eurocode finally asked why the stock pulls don’t drop off like ALL other stock cars that have been dynoed… HMMM… GIAC says “Factory freaks are always possible” LOL…

OK so the car makes 404 on a Mustang dyno… I know you can’t compare one to another but I made 361 on a Mustang dyno with 100 tune, pulley, hfc’s and exhaust… He had 91 tune and intake… Really? There only other car has run a 12.06 with 100 tune, exhaust and intake on MS109… Exactly what I ran except I trapped 2mph higher in a worse DA on Sunoco 100 GT260… I wonder what this rocket will run in the 1/4…

The best is these dolts actually eat it up and don’t question anything… I can’t wait to see some logs of this tune…

#2

yea it’s pretty hilarious. ppl are toting Tyson’s quarter as a reference. I can’t stand audizoo. and the person who asked where he can get tuning for dumbies is the reason why. I say we get a copy for most of the clowns on there

#3

Agreed! hey it’s a great time they should, they should just state all the facts… Like fuel, tune, mods, the fact that it’s been done with APR stage 1 tune and the same mods in a worse DA, etc.

#4

that fatezero guy seems to have a vendetta against APR, he was slamming their RS4 blower kit on QW iirc

#5

Made a war-starting post. Let’s burn this fucker and get these ignorant blokes thinking for a change

#6

Nice! I see GIAC is saying the 91 tune now makes what the race tune did back a few weeks ago… interesting… how is that being achieved? Like I said logs will tell alot… Oh and like you said this car should make some passes… according to GIAC if this tune is as good as the old race tune it should go 12.0 easy and probably better… To bad tyson never released his dyno… wonder what is showed… bet not 404…

#7

wow… 5 pages in less than 12 hours lol

edit: 6 pages

#8

Made another post calling FatB5fanboyZero out a little bit:
http://www.audizine.com/forum/showthread.php/467861-It-s-finally-here-GIAC-Stg-1-Flash-on-CA-91-oct?p=7219143&posted=1#post7219143

#9

Lol I wanted to respond to this post - http://www.audizine.com/forum/showthread.php/467861-It-s-finally-here-GIAC-Stg-1-Flash-on-CA-91-oct?p=7219193&viewfull=1#post7219193

simply stating that it’s 600 uselesswhp and that the supercharger you’re waiting 2 weeks for already has run more 11’s than the stupid tials.

Then I would have proceeded to call whoevers car it is in his fancy graph a dyno queen(i’m sure it’s his own), because that’s all it is. I’m just too lazy to care enough though.

#10

Lol yes the tial comments were amusing… Thread is LOCKED now, lmfao.

#11

its unfortunate they locked it before i could get this in there lol
http://i911.photobucket.com/albums/ac317/richib86/06_Haters_Gonna_Hate-s600x423-62662-580.jpg

#12

Assholes. LOL TiALS make 600AWHP all day!!!

#13

wow…so fatezero posts up his dyno…then edits out all his info the next day?

this is the same guy that earlier last week was saying an APR supercharged RS4 only made 362 whp (vs 302 whp stock) on ‘his’ dyno (he’s a volunteer shop rat at Raven…and pretends he owns the place)

Anyway, we all know the APR kit uses a TVS1320 and a tune countvohn GAVE to apr…and then 2 APR RS4s hit the strip with that tune and both banged out 11.8 on fucking pump gas, like it was no big thing.

SO…I guess 362 whp = 11.8 right? Wrong. 420-450 whp = 11.8, and that’s what just about every APR SC RS4 with countvohn’s tune has dynod.

So…yeah…fatezero is an APR enemy and loved posting this tomfoolery to make APR look bad. Giac are morons for aligning themselves with him.

#14

and could ALEX @ TAG please beg for sales a little more in the thread? Motherfucker made like 7 posts begging people to come get tuned at his scheisty shop. Fail.

#15

this was STRONG! addresses what I was talking about above, fatezero acting impartial (when he’s accidentally posting as a raven employee/giac dealer). This thread’s getting good (on page 3 of 7 lol)

so two great ‘results’ for GIAC B8 S4s

  1. 1fastS4 1/4 mile - but he’s a GIAC dealer, so yeah bye.
  2. fatezero’s dyno - but he works for a giac dealer, so yeah bye.

[quote=DAVID@EUROCODE]Also not sure who this was that made the post below and quickly deleted it, but it appears that they have an Audizine advertiser account as well as a personal for the purpose of self promotion. Raven has had GIAC decals on their vehicle in magazine photos so as far as I can tell, they are as affiliated as can be. Sneaky little devils though “not affiliated”. LOL

Beauty of dual monitors. :wink:

A little glimpse of how far certain companies will go to help promote certain products.

Somethings will never change, and go hand in hand as usual…dirty!
http://www.ecodetuning.com/gallery/Garbage%20In%20A%20Chip/B8S4/dirty.jpg

http://www.ecodetuning.com/gallery/Garbage%20In%20A%20Chip/B8S4/dirty.jpg
[/quote]

#16

and why is the 400whp dyno picture deleted from fatezero’s photobucket??

and why can’t I hack his photobucket?? :smiley:

#17

here’s where fatezero (not affiliated with raven lol who is not a giac dealer lol) said he installed an APR supercharger while not ? working for Raven lol

Sure bud. Sure.

p.s. this was ALL deleted by quattrofail moderators to hide the whole thing

http://i41.tinypic.com/k9devk.jpg

http://i41.tinypic.com/k9devk.jpg

#18

All this talk about tunes and 1/4 mile times I’m missing the drag strip! lol! Maybe I’ll take the car to get dynoed.

Questions: that Dyno pic from TAG shows 4 large fans supplying air to the car on the dyno, is that normal? I think the last time I had my car dynoed I had one fan…

#19

Every place is different

I’d dyno my car in oakville at that place but they’re a ripoff…120 for like 2 pulls? What?

#20

Your missing the dragstrip… I go through withdrawls of driving my cars all winter… April will be here soon though… Did you see the new headers on AW? Since they are two piece and we have the HFC’s already we may be able to install these w/o removing the motor… If that is the case I may be picking them up… Maybe they need a beta tester! LOL