REVOLUTIONARY RESULTS - Dragstrip database update notification thread

[sakimano]

Just a housekeeping entry from another post, just so we have another GIAC time on there. Although, I wonder if the reason it’s not there is because we only have one timeslip, rather than two?

The slip is in the video right here: http://youtu.be/WoCTPgHmTk8?t=25s

GIAC Stage 2 with AWE Tuning Pulley

GIAC Stage 2 with AWE Tuning Pulley

Saki, Can’t recall for sure but I have read of a few over the past couple years… Didn’t one run with you guys at TMP the one time?

PT, you are indeed correct. It’s not in the database but I’m not sure why. Here’s a video, with a picture of the timeslip taken by my own hand:

http://youtu.be/WoCTPgHmTk8

12.88 @ 108.9 for the GIAC 91 car, user seinsmeld. IIRC he has since sold his car and got a 2013.

Oh snap yeah… Totally forgot. I have another of his timeslips…when he raced me.

His car is for sale at Oakville audi if anyone wants to go 12.8 @ 110

http://i375.photobucket.com/albums/oo193/sakimano/20130109_094909_zps46f8273c.jpg

[bangoman]

Just a housekeeping entry from another post, just so we have another GIAC time on there. Although, I wonder if the reason it’s not there is because we only have one timeslip, rather than two?

The slip is in the video right here: http://youtu.be/WoCTPgHmTk8?t=25s

GIAC Stage 2 with AWE Tuning Pulley

GIAC Stage 2 with AWE Tuning Pulley

Saki, Can’t recall for sure but I have read of a few over the past couple years… Didn’t one run with you guys at TMP the one time?

PT, you are indeed correct. It’s not in the database but I’m not sure why. Here’s a video, with a picture of the timeslip taken by my own hand:

http://youtu.be/WoCTPgHmTk8

12.88 @ 108.9 for the GIAC 91 car, user seinsmeld. IIRC he has since sold his car and got a 2013.

Oh snap yeah… Totally forgot. I have another of his timeslips…when he raced me.

His car is for sale at Oakville audi if anyone wants to go 12.8 @ 110

http://i375.photobucket.com/albums/oo193/sakimano/20130109_094909_zps46f8273c.jpg

Or you could just get an rs4

[sakimano]

Added S6ATRON a.k.a. 39nasT on AZ…finally got full modlist

B5 S4 Avant
Manual
JHM RS6r turbos/JHM tuned
3" catless/3.5" single
100 octane
ER SMICs

11.76 @ 124.75 with 1.83 60’

http://i375.photobucket.com/albums/oo193/sakimano/2012-11-22153518-1.png

[tweetss4estate]

Should be 3" cat-less down pipes to clarify, don’t you think?

[sakimano]

Added TerryS B6 S4

Tiptronic
91 octane
Piggies (main cats intact)
Fast Intentions resonated 2.5" catback
JHM stage 1 supercharger
cool license plate

12.38 @ 111.72 with 1.78 60’

http://audirevolution.net/uploads/player_thumbs/3ixymt2EEhhKCDkEEDcW.jpg
Watch “JHM B6 S4 Vs B5 S4” on AudiRevolution.net

[sakimano]

Should be 3" cat-less down pipes to clarify, don’t you think?

why, in case retarded people come to view the thread?

I think everyone knows what that means. It’s noted on the quartermile list that there’s a downpipes/catback column. It’s also noted early in this thread what that would be describing.

Here’s an example of the list with the columns…

http://i375.photobucket.com/albums/oo193/sakimano/untitled_zps7ad58abc.jpg

[tweetss4estate]

Precisely, clarity removes assumptions… It’s your thread though.

[sakimano]

I don’t understand…what assumptions might people make?

They see that a B5 S4 has 3" catless/3.5" single

If anyone doesn’t know what 3" catless means, they’re not likely to

a) be on this web page in the first place
b) care what downpipes are anyway

I don’t think anyone is signing on, and saying ‘Was it a 3" rocketbooster and the owner prefers dogs?’. I just think you want to say ‘you’re wrong’ about something to me. Fine, say away. You showed me.

[sakimano]

Here tweets…this is why I don’t need to post it here. From the OP. Pretty clear to me.
If you ever get to the dragstrip, now you know how to post your information up.

When you post up your times either here, or in your respective platform’s subforum, remember to include as much info about the run as possible i.e.:
tune
downpipes/catback
octane of the fuel you used
power adder on your car (if stock, say so i.e. B5 S4 K03 or B8 S4 TVSr1320…and if you’re a B5 with K04/RS6 hybrids, make note. If you’re an NA car with a supercharger setup, give as much info as you can about the kit and the power adder )
boost/shot (if you’re a boosted car and know the peak boost, post it up. If you’re running nitrous, post the jet size)
other mods (intake mani? lw rotors? FMIC/SMIC? etc.)
other info (any weight reduction done? tire size? density altitude if you know it…however DA corrected times are never going on this list, but it is always interesting to know in extreme cases if a car ran at say -1000 feet, or +6000 feet)

[tweetss4estate]

I think that catless doesn’t clearly imply straight pipe, that there could be an expansion in the pipe where cats were or could have been. Also, different down pipe makers have different bends and meet with the exhaust differently. They are A R design 3" downpipes. I think that is relevant.

I don’t understand…what assumptions might people make?

They see that a B5 S4 has 3" catless/3.5" single

If anyone doesn’t know what 3" catless means, they’re not likely to

a) be on this web page in the first place
b) care what downpipes are anyway

I don’t think anyone is signing on, and saying ‘Was it a 3" rocketbooster and the owner prefers dogs?’. I just think you want to say ‘you’re wrong’ about something to me. Fine, say away. You showed me.

[Jupiteraudi]

Should be 3" cat-less down pipes to clarify, don’t you think?

It’s pretty clear what it refers to b/c the exhaust diameter is also mentioned.

[tweetss4estate]

Should be 3" cat-less down pipes to clarify, don’t you think?

It’s pretty clear what it refers to b/c the exhaust diameter is also mentioned.

I’m just trying to help, not trying to prove you wrong. I think it’s a good idea to mention maker of DP and size. That would be clear and give people an idea of who’s product was on the said car.

[sakimano]

I think that catless doesn’t clearly imply straight pipe, that there could be an expansion in the pipe where cats were or could have been. Also, different down pipe makers have different bends and meet with the exhaust differently. They are A R design 3" downpipes. I think that is relevant.

That’s a good point. I didn’t get the ARD info…thought it was all custom.

[tweetss4estate]

No, yeah, I didn’t mean to come across like that I was just suggesting help. AR design is not ARD. Two different companies.

[sakimano]

Someone asked for this info on the tts rs4, so here it is. It was posted somewhere here already… I think the old thread in the rs4 forum. The slip is there too. 1.8x 60’ I think

BlownRS4 - B7 RS4
11.42@125.11
Milltek catless/milltek catback
Tts supercharger, mrc tuned
93 octane
Full interior including baby seat
OEM ceramic rotors

https://www.youtube.com/watch?v=MbAj7rkcRB4&feature=youtube_gdata_player

http://i375.photobucket.com/albums/oo193/sakimano/2013-02-20225703_zps7200c880.png

[bangoman]

http://oneighturbo.com/featured/rides-brian-claars-audi-s4-avant/?utm_source=dlvr.it&utm_medium=facebook

Claims of a 12.51 @ 112 for vwrcer. Have asked for proper verification but just put the link here as a reminder.

[sakimano]

that was ages ago, no? He ran that about a week after axel went 12.6 @ 114

edit: he’s on our list already for that time. He posted slips and videos. Posted them here too.

VWRCER B6 S4 4.2 Manual 94 PES JHM headers/3.0" custom PES SC (M90) 7 lbs 12.51 112.07 1.85 Avant, JHM intake spacers, 034 LWFW/CMFX400, JHM LWCP

[bangoman]

that was ages ago, no? He ran that about a week after axel went 12.6 @ 114

edit: he’s on our list already for that time. He posted slips and videos. Posted them here too.

VWRCER B6 S4 4.2 Manual 94 PES JHM headers/3.0" custom PES SC (M90) 7 lbs 12.51 112.07 1.85 Avant, JHM intake spacers, 034 LWFW/CMFX400, JHM LWCP

Weird. I, like BCsniper, only saw the 12.77. User error, carry on!

[sakimano]

ADDED 3 times…all VERY fast B8 S4s.

1. Auditude2.0T (auditude’s dad) at ATCO raceway

B8 S4
REVO tuned
93 octane
DSG
stock cats/AWEcatback
RocEur Intake

12.27 @ 112.11
60’ 1.82

http://i375.photobucket.com/albums/oo193/sakimano/zene4y8a_zps6bbb2311.jpg

2. Auditude3.0T at ATCO raceway

B8 S4
GIAC stage 2 tune
AWE pulleyu
93 octane
DSG
034 test pipes/AWE catback
RocEuro Intake

12.10 @ 113.77
60’ 1.79

http://i1219.photobucket.com/albums/dd440/Auditude20T/FB0F9C5A-7117-4648-82E6-294ECFB7D68D-2711-00000084DDC30BED_zpsaf1f54db.jpg

3. Austin@GIAC at Sacramento Raceway

B8 S4
GIAC stage 2 tune
AWE pulley
104 octane (GIAC 100 file)
DSG
stock/BCS performance catback
AWE intake

11.89@117.15
60’ 1.82

http://www.giacusa.com/images/austin/B8S4/GIAC_Stg2_slips_Sac.jpg

[bangoman]

Wowsers. Big thanks to all for getting to the strip. And awesome results.